The Dynahead 6×6 takes inspiration from the big trucks used in grueling off-road world of truck trials. The sleek body appears on the G6-01TR chassis, which is based upon the G6-01, with hub reduction axles providing extra height for taking on rougher terrain.
- 1/18 scale 6WD R/C model assembly kit. Length: 453mm, width: 244mm, height: 232mm. Wheelbase: 173+126mm.
- The cab-over truck body is a special design by Takayuki Yamazaki of PDC Design-works.
- Hub reduction axles raise ground clearance by 15mm; in conjunction with the traction provided by a 37.35:1 gear ratio (with kit-included 18T pinion), the Dynahead 6×6 has awesome off-road and crawling capability!
- 5-spoke wheels are paired with V-tread block tires (Item 53854) for superlative bite.
- With suspension reassembly and a separately-sold transmitter with 4WS function and R/C equipment, the rear wheels can be made steerable.
- Type 540 brushed motor included.
- Requires: 2-Channel Radio, receiver, servo, ESC (electronic speed control), 7.2volt battery pack & charger, and Tamiya PS paint.
Radio System: There is a choice of a TWIN STICK (Traditional) radio or a Steering Wheel (Modern) radio. Both radios operate on 2.4Ghz and use the new Crystal-Free technology, so you can run multiple cars at the same time without any interference. The steering wheel radio is included in the price, a traditional twin stick radio just a few pounds more.
ESC: This is the connection between the radio system and the motor. You have two choices - the standard Tamiya unit (TBLE02S) or the Mtroniks Auto Sport Tuned 20 ESC. The Mtroniks unit is waterproof and allows slightly more powerful motors. The Tamiya unit allows upgrade to Tamiya's own "brushless" motors later but isn't waterproof. Tamiya's unit goes faster in reverse. Both units feature electronic brakes. The Tamiya ESC is included in the price, the waterproof one is just a few pounds more.
Battery: The higher the number, the longer the run time. The 1800 battery is included in the price.
Charger: You can choose to upgrade the charger - the mini peak (auto cut off) charger will take 2 to 3 hours depending on the battery, the 3 amp charger between 40 minutes and 90 minutes, and the 2 amp charger somewhere in-between. The overnight charger is included in the price.
If you would like more options, would like to choose a package without one of the above components, or wish to purchase the car kit on it's own, please search our site for the CUSTOM option of this kit - easily found by searching for the kit name or number followed by CUSTOM.
PLEASE NOTE: We are unable to supply a bearing set for this model at this time, due to the high number of unusual 630 size bearings needed.