VERY LIMITED STOCK AVAILABLE NOW

We are delighted to announce the re-issue of 1/10 R/C Nissan R91CP which was sold as Item 58109 in 1992 and Item 84264 in 2012. The Nissan R91CP featured a low-profile aerodynamic body and a 3,500cc V8 twin turbo engine. This car achieved the victory with three Japanese drivers (Kazuyoshi Hoshino, Toshio Suzuki and Masahiro Hasemi) at the 24 Hours of Daytona, the first time for a Japanese car.

Direct-Drive 2WD Chassis 
Based around an ABS plastic bathtub, with space frames front and rear and FRP plates, the chassis is a composite design that offers a rigid base to back up the fluid suspension: the result is a crisp, responsive drive. At the front, it has an independent coil-sprung king pin suspension setup, while the rear rigid suspension is a 3-point design with a 1.5mm thickness FRP T-bar and CVA oil damper. Ground clearance is adjustable (front: 2 settings, rear: 3 settings) according to running surface.

About the Model
- This is a 1/10 scale R/C model assembly kit. Length: 480mm, width: 204mm, height: 109mm. Wheelbase: 280mm
- The distinctive low-profile aerodynamic body, wing and front light cases are separately moulded in polycarbonate (please note that LED lights cannot be attached)
- Body and wing have pre-made holes
- Black nylon plastic parts realistically recreate side mirror, wing stay, induction pod and wiper
- Features a styrene plastic cockpit and figure
- Gun metallic 5-spoke wheels are paired with high-grip sponge tyres
- Comes with helmet markings of three Japanese drivers (Kazuyoshi Hoshino, Toshio Suzuki and Masahiro Hasemi)  

Photographs may show assembled model with electronics fitted which are not included in the above price.  
 
Pricing Note: We have priced this kit above, as we do the whole range, assuming that you will not require the standard ESC unit.  If you would like the kit with the ESC included, simply add the Carson Dragster or Tamiya Hobbywing ESC from the drop down below - which adds £15-£18 to the total.  Note also, Tamiya kits do not come shrink wrapped in the UK or Japan. The box sticker may state "ESC Included" whether you order it with or without this unit.
 
Options Explained

Bearing Upgrade: These make the car run more smoothly and are easily installed during assembly. If there is no option for these shown, then the kit already includes the bearing upgrade as standard. These are entirely optional.

Radio System: There is a choice of a TWIN STICK (Traditional) radio or a Steering Wheel (Modern) radios. All operate on 2.4Ghz and use the new Crystal-Free technology, so you can run multiple cars at the same time without any interference. All radios chosen from this page will include a steering servo as these are not included in the kit itself.

ESC: This is the connection between the radio system and the motor. You have several choices. Tamiya no longer make their own ESC, instead they supply from their facilities Hobbywing or Mstyle units. Where a model number is shown (e.g. 20 or 15) that is the motor capacity of the unit - the lower the number, the more powerful a motor you can install later. All work with the motor in the kit.

Battery: The higher the number, the longer the run time.

Charger: Charge time is proportional to the battery you choose. Some examples - for the 1800 battery (others will take longer) - USB charger takes around 4 hours, Mid Speed around 2 to 3 hours, Etronix Fast Charger ET0208 can be as quick as 60 minutes in the house or 30 minutes in the car and Etronix ET0209 is even faster but mains only.