The digiSOUND5csc is the new RC car sound module from Mtroniks Ltd.
It is the worlds first 100% waterproof, plug n play sound module
designed to take the hassle out of giving your model a realistic sound!
The sound module requires NO programming or set up, it
comes with a realistic sound pre-installed leaving just the installation
to complete before you can get under way! The unit comes complete with
built in amplifier, wiring loom and even a 50.0mm diameter waterproof
You simply install the unit in your model and go! There is no complicated PC interface to deal with or complicated set up, you REALLY
do just have to plug it in and go!!! Add this to the legendary Mtroniks
waterproof construction and you really don't need to look any further!
The digiSOUND sound module for RC cars will work between 6.0 and 12.0V
This version of the digiSOUND comes with a pre installed V8 Race car
sound effect complete with straight cut gear changes, up and down the
Detailed specification of module and speaker
Module power output:
1.5 Watts RMS @ 7.2V (4 ohms), distortion typically 0.1%
5 Watts RMS @ 12V (4 ohms), distortion typically 0.1%
Speaker rating: 1.0 Watts RMS (8 ohms), It is possible to run 2 speakers in parallel (7.2V application)
The supplied speaker is 1.0 Watt RMS, 8ohms. These are for use on
7.2V installations. Up to 2 speakers can be run in parallel (See image
of 2 speakers mounted in a short course truck bodyshell, this is the
best way to mount 1 or 2 speakers in your RC car bodyshell as it gives
the speakers the best chance of creating a realistic sound with bass
- Please note, only 1 speaker is supplied with the sound modue
system, additional speakers are available) taking full advantage of the
amplifier power at 7.2V. If you decide to run your sound module at 12V
you will need to purchase a more powerful speaker or speakers due to the
increased power available from the amplifier when running at 12.0V
Notes on speaker performance.
The 50.0mm speaker
included with your module is waterproof so it is safe to use outside,
you should always install your speaker into a suitable enclosure (your
lexan bodyshell) to ensure the best power handling, frequency and bass