We largely stock Carson radio equipment now that Acoms have withdrawn from the model market. These are compatible with other ranges (e.g. Futaba, Sanwa) in most cases, however Futaba servos have a slightly different plug that needs a tab trimming off it before plugging into an Carson receiver - this does not stop the servo being plugged into a Futaba receiver at a later date though, so should not be feared!
Also offered are a selection of very good, reliable, units from Etronix, Helion and Absima for those more unusual applications. |
-
3-channel receiver suitable for CR2S(V2), CR3P and CR4T radio.
Specification:
2.4Ghz A.F.H.D.S. system
3-channel
-
3-channel receiver suitable for CR2S(V2), CR3P and CR4T radio.
Specification:
2.4Ghz A.F.H.D.S. system
3-channel
-
Acoms Antenna (Aerial) for AP202 / AT201
-
Acoms Antenna (Aerial) for AP202 / AT201
-
Acoms 4xAA battery enclosure with lead; suitable for powering Receiver and servo in Nitro cars.
-
Acoms 4xAA battery enclosure with lead; suitable for powering Receiver and servo in Nitro cars.
-
Acoms Receiver On/Off Switch
-
Acoms Receiver On/Off Switch
-
Acoms Servo. Standard in 2 & 4 channel radios. 4.1 kg/cm.
-
Acoms Servo. Standard in 2 & 4 channel radios. 4.1 kg/cm.
-
Acoms Servo horns, screws and zip-ties as supplied in a radio set.
-
Acoms Servo horns, screws and zip-ties as supplied in a radio set.
-
This Carson receiver is specified as the replacement unit for use with the 500046 Reflex 2.4Ghz TWIN STICK 2 channel radio. It is technically a 6 [...]
-
This Carson receiver is specified as the replacement unit for use with the 500046 Reflex 2.4Ghz TWIN STICK 2 channel radio. It is technically a 6 [...]
-
This Carson receiver is specified as the replacement unit for use with the Reflex Pro 3 and 3.1 TWIN STICK 2 channel radio and the Reflex Pro 3 WHEEL [...]
-
This Carson receiver is specified as the replacement unit for use with the Reflex Pro 3 and 3.1 TWIN STICK 2 channel radio and the Reflex Pro 3 WHEEL [...]
-
Same as 501535 but supposedly water resistant. This Carson receiver is specified as the replacement unit for use with the Reflex Pro 3 and 3.1 TWIN [...]
-
Same as 501535 but supposedly water resistant. This Carson receiver is specified as the replacement unit for use with the Reflex Pro 3 and 3.1 TWIN [...]
-
This Carson receiver is specified as the replacement unit for use with the Reflex Pro 2 TWIN STICK 6 channel radio.
It is not suitable for the [...]
-
This Carson receiver is specified as the replacement unit for use with the Reflex Pro 2 TWIN STICK 6 channel radio.
It is not suitable for the [...]
-
Carson Servo. Standard in Carson radios where included. 3kg/cm torque.
See also ET0015 if in stock, seems to be the same servo with a differe
-
Carson Servo. Standard in Carson radios where included. 3kg/cm torque.
See also ET0015 if in stock, seems to be the same servo with a differe
-
Carson C501515 Spare Receiver for C501001 Reflex Stick 2.4Ghz 6 Channel
-
Carson C501515 Spare Receiver for C501001 Reflex Stick 2.4Ghz 6 Channel
